The S2000 is the production car with highers MPS (mean piston speed). With 125BHP/liter, it was for years the highest specific power output car in the market (dethroned by the ferrari italia with 128bhp/liter).
And although the F20C was a development platform for Honda's glorious K-series engines, the fact that it went into the S2000 (a celebration car), allowed him a better designed valve train, FRM cylinder sleeves and a closer to F1 piston ans skirt design than any other production engine; making it what many consider to be the best 4cylinder engine ever built.
All of this is fantastic and i know several engines running strong after turboed to twice the power, and over 200.000km on the clock, truth be told that there beauties Rev very high, get abused quite a lot, and even with all the Honda iron-clad manufacturing quality, truth is that you should check your bearings and journals every 100.000km.
I mean, it's not a self destructing mechanism like the BMW high power gas engines, but it does deserve some caring, particularly if you race the car.
As such, approaching 140.000km, even with Castrol's "titanium fluid" oils (claims to increase viscosity under pressure), my car is about to see it's bottom-end opened for maintenance purposes, and since we're touching it, why not replace the bearings and journals with some KING 3 metal ones!?
And since it's going to be all tight and new, and it's already lightened at the flywheel (and consequently in desperate need for a remap to adjust the idle), why not also UP the revs!?
It's one of those things most people don't really understand until they hit the track: you can have 600 NM on your diesel, but since you only have 4000 rpms to use before it disintegrates, you keep shifting! If you increase gear ratio you'll have a grip-to-drift uncontrollable thing on your hands.
However, if you have a linear engine with low torque but very high power due to a very high rev, you can accelerate taking full potential of the engine and not need to shift gears between corners, and this is an advantage that most miss, until they see a comparison between the Honda Civic ep3 type-r and the S2000 on a twisting track... the simple 1000 rpm difference, allows for the s2000 to be faster than it's better balanced, i-vtec, evolution.
So... Can I get more our of the s2000?
Well ... so-so!
The MeanPistonSpeed is a bit over 25Mts/second right on the sustained limits, but it's known that peaks of 27mts/s are possible with forged internals... Well the s2000 has forged internals form factory. As long as you don't make a living out of running the engine at 27mts/s MPS, it can handle it.
The problem is the head. I mean it flows beautifully from factory, but valve floating will surely mean a catastrophic failure.
There's something else, the engine cams design drops power after 8500 rpm.
However, aftermarket has a solution and a bit of research has made me a buying list of goodies, and they've started to arrive.
So Without further delay, where comes the list:
1st - FERREA 6000 racing hollow valves. Much lighter! Less inertia = less mass to control valve float and less energy loss. It includes valve guides.
2nd - Brian Crower Dual valves with higher grade and steel retainers and seats.
3rd - Now that we can push the valves further and for longer timings, time for Skunk2 Stage 2 cams. These immediately up the powerband by 700RPM.
4rth - The car does not have I-vtec, but you can unlock 10 to 15 bhp out of this engine if you tune it to supper high revs with advance... fully adjustable cam gears:
5th - Adding to shit the head is going to be ported and golf-ball style bumps to provide perfect racing-level flow. We'll also be shimming the head to increase compression (like the JDM)
6th - Toda timing chain and Toda chain tensioner (already installed).
7th - Yet to be brought - LINK G4X ecu:
8th - Yet to be brought - ID4Motion s2000 digital cluster... more RPMS need a new cluster:
9th- I'm very happy with the AEMV2 CAI and the mid-range it provides, but nothing makes engine response and mid-range like ITB's! Guess what just landed? OBX ITB's:
10th - yet to be brought- Cometic gasket and ARP head bolts
11th - yet to be brought - King tri-metal bearing s and journal set + ARP rod bolts
12th - yet to be brought - J's racing exhaust header and a 70mm exhaust (yet to be chosen).
13th - yet to be brought - Injectors... Factory will not fit the OBX fuel rail almost certainly
14th - J's carbon air box and a custom made trumpet to airbox adapter.
As you can guess, the car will easily handle 9600rpm (short of 27mts/s MPS) and limit on 10.000rpm (at 28mts/s).
I'll be adding to this post as stuff arrives, and as the mechanic starts to work and send some pictures, I'll add to this article.
Stay Tuned!
No comments:
Post a Comment